Hybrid Bicycle
HYBRID
As always, Merida offers an extensive and wide range of hybrid models for 2017. After all, HYBRID stands for crossing different bike types to create versatile cycles that work for everything. However, with slightly different properties and alignment depending on the series. For those of you who do not want any restrictions on your bike, we at MERIDA have produced the CROSSWAY series which is the perfect all-round bike. The bike is a perfect commuting partner with components that are more than adequate, thanks to the dampened fork and lightly patterned tires, you can ride with your CROSSWAY off the paved roads and still feel safe.
SPEEDER
The models have borrowed a lot from the road cycle and give you easy-rolling and quick cycling. URBAN is the modern utility cycle that gives you cycling experiences in the everyday urban environment. Whatever the purpose, MERIDA has a HYBRID for you. SPEEDER The best of both worlds? With agility and acceleration as inspiration from the road bikes but with straight steering and robustness from Mtb, we have created lightly rolled bikes with nice driving characteristics. Driving position, straight guide and hydraulic disc brakes give full control. The various Models in the Speeder series work perfectly for both commuting and training, when speed and reliability are combined. The seating position is more upright than that of a racer, which means that you can have a comfortable driving position with good control. 28 mm tires provide low rolling resistance but sufficient width for varying surfaces. All Speeder are adapted for everyday use and thus prepared for screens, support and package holders. Speeder is a great elite commuter who gives you speed in a comfortable form and helps you to be first away from the next red light.
As always, Merida offers an extensive and wide range of hybrid models for 2017. After all, HYBRID stands for crossing different bike types to create versatile cycles that work for everything. However, with slightly different properties and alignment depending on the series. For those of you who do not want any restrictions on your bike, we at MERIDA have produced the CROSSWAY series which is the perfect all-round bike. The bike is a perfect commuting partner with components that are more than adequate, thanks to the dampened fork and lightly patterned tires, you can ride with your CROSSWAY off the paved roads and still feel safe.
SPEEDER
The models have borrowed a lot from the road cycle and give you easy-rolling and quick cycling. URBAN is the modern utility cycle that gives you cycling experiences in the everyday urban environment. Whatever the purpose, MERIDA has a HYBRID for you. SPEEDER The best of both worlds? With agility and acceleration as inspiration from the road bikes but with straight steering and robustness from Mtb, we have created lightly rolled bikes with nice driving characteristics. Driving position, straight guide and hydraulic disc brakes give full control. The various Models in the Speeder series work perfectly for both commuting and training, when speed and reliability are combined. The seating position is more upright than that of a racer, which means that you can have a comfortable driving position with good control. 28 mm tires provide low rolling resistance but sufficient width for varying surfaces. All Speeder are adapted for everyday use and thus prepared for screens, support and package holders. Speeder is a great elite commuter who gives you speed in a comfortable form and helps you to be first away from the next red light.
CROSSWAY URBAN
Crossway Urban is a series of bicycles with comfortable seating that are easy to roll and fun to ride. An updated and modern utility bike simply. As the name indicates, it is a versatile bike primarily adapted for urban use. It is the bike for those who have decided to end the time-consuming and expensive journey to work or just wish you a stylish bike for everything from transport to training. All models in the series are based on a lightweight aluminum frame and are equipped with full-screen screens. Low weight makes the bike easy to handle, custom screens protect from dirt and give a stylish look. The driving position on a Crossway Urban is comfortable and upright which relieves the shoulders, neck and back. At the same time as low weight and smooth tires provide an easy-to-roll and fun bike. Crossway Urban is for the cyclist who wants a stylish.
To get more info visit roadadventure.com
How to perform Dynamic Pile Tests?
Dynamic drilling pilots are performed to determine the capacity of the bearings and recesses of the reinforced concrete products. The technology by which the pulling characteristics and bearing properties are tested is governed by separate provisions of SNIP and GOST 5686-94.
Dynamic Pilot
Pilot Tests
In order to accurately assess the capacity of the product recesses, an oscilloscope analyzer is actively used.
Once the bile and static load data tested by pilots according to the requirements of SNIP and GOST 5686-94 are recorded in the relevant documentation. There are also data on soil characteristics.
Characteristics and purpose of the test Dynamic tests for experienced pilots, as well as an estimate of their dump capacity, shall be performed with a focus on each of the types of soil in which accumulation occurs.
Regardless of a number of characteristics of the soils in which the accumulated concrete products will accumulate, all the work is done with a clear orientation to the requirements of GOST and SNiP.
Dynamic and static pilots testing as well as soil testing are performed when lifting objects such as:
Underwater bridge foundations;
Coastal zones;
Oil platforms
Dynamic testing of pilots in the process Such patrols produce a test run. In this case, the loader located above the piles is a special hydraulic hammer of the drop or impact type.
If there is no such unit on the construction site to work on the stacks, the assessment implies the existence of an alternative bending device. In this case, the program for the testing of reinforced concrete products allows the use of a pipe type hammer.
Based on the requirements of GOST and SNiPa, the weight of this hammer for bored pilots is 3.2 tons.
Its installation is made of elements between piles. The installation is made with the orientation of the GOST and SNiPa standards, the installation is done by means of a crane in the space between the piles, at the place where the subsequent soil tests will be carried out.
To determine the degree of heterogeneity of soil structures within the building site. Evaluate and compare load capacity and packet loading. In order to detect bearing layers of soil and weakened sections of the pile field. In order to obtain accurate and reliable data on bearing capacity after drive.
GOST and SNiP allows you to use the same equipment as driving, these positions clearly indicate the required distance between piles at work. The final result of the test of the probed products is presented in the form of the resulting value of the failure of the chickens. This is the depth at which the pile sinks at a hammer hit.
Dynamic Pilot
Pilot Tests
In order to accurately assess the capacity of the product recesses, an oscilloscope analyzer is actively used.
Once the bile and static load data tested by pilots according to the requirements of SNIP and GOST 5686-94 are recorded in the relevant documentation. There are also data on soil characteristics.
Characteristics and purpose of the test Dynamic tests for experienced pilots, as well as an estimate of their dump capacity, shall be performed with a focus on each of the types of soil in which accumulation occurs.
Regardless of a number of characteristics of the soils in which the accumulated concrete products will accumulate, all the work is done with a clear orientation to the requirements of GOST and SNiP.
Dynamic and static pilots testing as well as soil testing are performed when lifting objects such as:
Underwater bridge foundations;
Coastal zones;
Oil platforms
Dynamic testing of pilots in the process Such patrols produce a test run. In this case, the loader located above the piles is a special hydraulic hammer of the drop or impact type.
If there is no such unit on the construction site to work on the stacks, the assessment implies the existence of an alternative bending device. In this case, the program for the testing of reinforced concrete products allows the use of a pipe type hammer.
Based on the requirements of GOST and SNiPa, the weight of this hammer for bored pilots is 3.2 tons.
Its installation is made of elements between piles. The installation is made with the orientation of the GOST and SNiPa standards, the installation is done by means of a crane in the space between the piles, at the place where the subsequent soil tests will be carried out.
To determine the degree of heterogeneity of soil structures within the building site. Evaluate and compare load capacity and packet loading. In order to detect bearing layers of soil and weakened sections of the pile field. In order to obtain accurate and reliable data on bearing capacity after drive.
GOST and SNiP allows you to use the same equipment as driving, these positions clearly indicate the required distance between piles at work. The final result of the test of the probed products is presented in the form of the resulting value of the failure of the chickens. This is the depth at which the pile sinks at a hammer hit.